Graco Fluid Handling Solutions
Delivery Without the Fuss
Graco Lubricant Transfer & Application
Accurate, clean and efficient transfer of materials with less waste.
What makes our lubrication equipment so special?
Reliable performance day after day in the most demanding environments
Our ability to meet job requirements with high-quality equipment
Industry leading customer support and product availability
Graco Fireball Range of Oil Pumps
Features and Benefits:
Non-corrosive air motor design for long life (metal parts made of stainless steel, aluminium and chrome)
No metal-to-metal contact means longer pump life and ensures pump will withstand harsh environments
Double-acting piston pump provides reliable fluid flow
Few moving parts translate into low maintenance and low cost of ownership
Open exhaust port provides continuous operation without icing
Typical Applications:
Medium to low volume and pressure lubricant transfer
Ideal for on and off-road applications including:
Automotive dealerships - Garage oil pumps (drum pump)
Heavy-duty dealerships
Fast Lube centre and service shops i.e. garage oil pumps (drum pump)
Fleet service facilities i.e. garage oil pumps (drum pump)
In-plant
Lube trucks
Mining
Typical Fluid Handled:
Petroleum and synthetic-based oils
Mini Fire-Ball 225 3:1
You can't afford down time, especially when your shop is small and your work force depends on equipment performance. The Mini Fire-Ball 225 is an engineered design with fewer moving parts, which means less wear out, and reduced downtime and more profit for your business.
Fluid Flow l/min @ 80 cpm - 7.0 (1.84)
Maximum Fluid Pressure bar (psi) - 37 (540)
Air Operated Range bar (psi) - 2.7-12.5 (40-180)
Air inlet Port Size - 3/8 in npt (f)
Fluid Outlet Port Size - 1/2 in npt (f)
Typical Applications:
Continuous duty, maintenance facility dispensing motor oil, gear oil, automatic transmission fluid, hydraulic fluid
Dispense Points: 1 to 2
Annual Usage: Up to 24 602 l
Line Length: Up to 76.2 m
Fire-Ball 300, 5:1
Ideal for Medium Sized Shops with High Pressure Grease Dispense and Oil Transfer
Install the Fire-Ball 300 in high pressure, medium volume oil and grease dispense applications such as automotive dealerships, fast lube centers and service shops. A three inch differential air motor ensures smooth pumping and the smooth double-acting pump design provides reliable fluid flow and accurate dispense.
Fluid Flow l/min @ 80 cpm - 9.3 (2.8)
Maximum Fluid Pressure bar (psi) - 62 (900)
Air Operated Range bar (psi) - 2.7-12.5 (40-180)
Air inlet Port Size - 3/8 in npt (f)
Fluid Outlet Port Size - 1/2 in npt (f)
Typical Applications:
Continuous duty, maintenance facility dispensing motor oil, gear oil, automatic transmission fluid, hydraulic fluid
Dispense Points: 1 to 3
Annual Usage: Up to 114 000 l
Line Length: Up to 152.5 m
Fire-Ball 425, 3:1
The Pump of Choice for Your Most Demanding High Volume Applications!
The Fire-Ball 425 features a large 4.25 inch air motor to supply the power you need for long pipe runs and higher volume dispensing. An Ideal choice for applications such as truck fleet service facilities and in-plant applications where multiple dispenses happen at the same time. The Fire-Ball 425 delivers field-proven durability for multiple fluid types and exceptional cost savings that are hard to beat!
Fluid Flow l/min @ 80 cpm - 50.6 (13.4)
Maximum Fluid Pressure bar (psi) - 37 (540)
Air Operated Range bar (psi) - 2.7-12.5 (40-180)
Air inlet Port Size - 1/2 in npt (f)
Fluid Outlet Port Size - 3/4 in npt (f)
Typical Applications:
High flow, low pressure maintenance facility dispensing motor oil, gear oil, automatic transmission fluid, hydraulic fluid
Dispense Points: 3 to 4
Annual Usage: Up to 114 000 l
Line Length: Up to 76.2 m
.jpg)
Fire-Ball 425, 6:1
Fluid Flow l/min @ 80 cpm - 6.6 (25.3 liters)
Maximum Fluid Pressure bar (psi) - 76 (1100)
Air Operated Range bar (psi) - 2.7-12.5 (40-180)
Air inlet Port Size -1/2 in npt (f)
Fluid Outlet Port Size - 3/4 in npt (f)
Typical Applications:
High flow, low pressure maintenance facility dispensing motor oil, gear oil, automatic transmission fluid, hydraulic fluid
Dispense Points: 3 to 4
Annual Usage: Up to 114 000 l
Line Length: Up to 152.5 m
Graco Dura-Flo
Graco’s Xtreme and Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.
Features:
Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
High pump pressure and flow performance to handle a broad range of paints and coatings
Improved serviceability with fewer parts, faster repairs and lower ownership cost
Monitors and protects your pump with DataTrak
Dura-Flo, 6:1
Output at 60CPM l/min - 65.9 (17.4)
Maximum Fluid Pressure bar (psi) - 42.7 (620)
Maximum Air Input Pressure bar (psi) - 6.9 (100)
Typical Applications: High pressure, high volume for motor oil, gear oil, automatic transmission fluid, hydraulic fluid
Dispense Points: 3 to 4 (simultaneous)
Annual Usage: Up to 114 000 l
Line Length: Up to 152.5 m
Dura-Flo, 10:1
Output at 60CPM l/min - 65.9 (17.4)
Maximum Fluid Pressure bar (psi) - 81.3 (1180)
Maximum Air Input Pressure bar (psi) - 6.9 (100)
Typical Applications: High pressure, high volume for motor oil, gear oil, automatic transmission fluid, hydraulic fluid
Dispense Points: 3 to 4 (simultaneous)
Annual Usage: Up to 114 000 l
Line Length: Up to 228.6 m
Dura-Flo, 23:1
Output at 60CPM l/min - 34.8 (9.2)
Maximum Fluid Pressure bar (psi) - 118.9 (1725)
Maximum Air Input Pressure bar (psi) - 5.2 (75)
Typical Applications: High pressure, high volume for motor oil, gear oil, automatic transmission fluid, hydraulic fluid
Dispense Points: 2 to 2
Annual Usage: Up to 114 000 l
Line Length: Up to 304.8 m
Graco Husky Double Diaphragm Pumps
We offer the Graco Husky range of pneumatic diaphragm pumps (air pump) suitable for most fluid transfers, including diesel fuels, lubricants and water.
Husky 716 Double Diaphragm Pump
Get high flow rates in a small, portable package. This 3/4-inch double diaphragm pump has an external controller for remote control capabilities and is available in aluminium and 316 stainless steel constructions.
Features:
3/4 in (19.05 mm) center- and end-porting
No seals to leak or fail
Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
Easy-to-service air valve and ball checks
Husky 1050HP High Pressure Air-Operated Diaphragm Pump
1 inch Air-Operated Triple Diaphragm Pump
Choose between low pressure and high pressure operating modes with Graco’s low-high pressure mode valve
The Husky 1050HP is the first pump on the market that allows users to choose between low pressure and high pressure operating modes with Graco’s low-high pressure mode valve. High pressure operation isn’t always required, so switch to the low pressure mode to reduce air consumption up to 50%. These features, combined with the quality and reliability of our standard Husky diaphragm pump design; make this one of the most unique high pressure diaphragm pumps on the market.
Features:
Increased fluid pressure without sacrificing flow
Low-high pressure mode valve lets you operate the pump as a standard AODD or a high pressure AODD
Reduce air consumption up to 50% with the low pressure mode
Same repair parts as our Husky 1050 air-operated double diaphragm pump reduces inventory levels
Application areas: Filter press, ceramic, high head pressure or long distance
Applications:
Bulk Supply System
Chemical Transfer
High-Viscosity Material Transfer
Low-Viscosity Material Transfer
Medium-Viscosity Material Transfer
Oil Transfer
.jpg)
Graco Husky 1050A Double Diaphragm Pump
The Graco Husky 1050A 1-inch double diaphragm pump is equipped with an effective and reliable air valve system. Available in aluminium / TPE (UL).
Features:
1 in. (25.4 mm) ANSI end-porting
High flow - 189 lpm in a compact, portable size
Fluid pressure to 100 psi (7.0 bar, 0.7 MPa)
All Graco diaphragm pumps offer flow rates up to 25% greater than many competitive pumps with PTFE diaphragms
.jpg)
Graco Husky 1590 Double Diaphragm Pump
The Graco Husky 1590 is ideal for applications requiring high flow rates and a compact, portable design. This 1-1/2 inch double diaphragm pump offers a patented, high-reliability closed center air valve that is online serviceable and an epoxy-coated air section for tough environmental conditions.
Features:
1-1/2 in. (38.1 mm) ANSI end-porting
High flow - 378 lpm in a compact, portable size
Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)
Lube-free operation
Available in polypropylene, kynar, aluminium and stainless steel
Epoxy-coated air section for tough environmental conditions
Husky 2150 Double Diaphragm Pump
Epoxy-coated air section makes this pump ideal for tough environmental conditions. This 2-inch double diaphragm pump offers larger ports for increased flow. Available in aluminium, 316 stainless steel, ductile iron, polypropylene and PVDF.
Features:
2 in (51 mm) ANSI end-porting
Fluid flow up to 568 lpm
Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)
Lube-free operation
Epoxy-coated air section for tough environmental conditions
5-year warranty on wetted parts and 15-year warranty on center sections
Husky 3300 Double Diaphragm Pump
3 inch Positive Displacement Double Diaphragm Pump
3 inch (76.2 mm) connection available in aluminium, polypropylene and stainless steel
The Husky 3300, 3 inch (76.2 mm), air-operated double diaphragm pump features a four bolt joint design, which provides even sealing pressure for leak-free operation and a three-piece manifold for increased installation flexibility. Available in aluminium, polypropylene and stainless steel.
Features:
Expanded material offering to handle numerous applications
Flow rates up to 1,135 lpm
Modular stall-resistant air valve design
Complete 3 inch family of diaphragm pumps available in aluminium or polypropylene center sections
Heavy-duty construction
Faster change over with spring loaded pilot valves
Husky 15120 & 2200 Polypropylene and Kynar
We are happy to introduce the new 1.5" and 2" Husky AODD pumps for the transfer of chemical & corrosive fluids. These pumps are built to last, work efficiently and avoid leakage of dangerous fluids.
We reach these targets by following features:
One-piece center section avoids leakages
Polypropylene center section for chemical compatibility
Four bolt joint design creates better sealing
Reinforced frame makes it stronger and gives a smaller footprint
Over-molded diaphragms are more resistant & last longer
Furthermore these pumps are:
Easy to maintain: external air valve and pilot valves
Equipped with a modular air valve with less parts to repair
Very efficient with a high flow rate
These pumps are part of a wide product range of 1/4" until 3" PP and Kynar pump
Husky 15120
Pump Size: 38.1 mm (1-1/2 in.)
Flow Rate: 454 LPM
Husky 2200
Pump Size: 50.8 mm (2 in.)
Flow Rate: 757 LPM
New ChemSafe AODD Transfer Pump
We are proud to announce a new addition to the Graco AODD transfer pumps product line: The Graco ChemSafe.
The ChemSafe product line is designed for the transfer of very corrosive and abrasive fluids and is compatible with 99% of transferred chemicals.
Till today, you could sell the “standard” Husky pumps for the transfer of corrosive/abrasive fluids and you can continue to do so. However, please note that ChemSafe pumps are designed to tackle the more harsh applications.
Both PTFE and UHMWPE pumps can be used for the transfer of corrosive products, only for the transfer of abrasive products PTFE is not advised.
You can find here some key features of our ChemSafe line:
Available in ¼” till 1.5” sizes (up to 376 l/min)
No exposed metal parts
CNC machined fit design to avoid leakages
T-bolt design for superior sealing
Removable air motor for easy service
Fluid paths are fully PTFE or UHMWPE
Anti-stalling air valve
Low icing muffler
These features, combined with the quality and reliability of our high class manufacturing standards, make ChemSafe pumps an excellent choice for transferring corrosive and abrasive products.
Graco's ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. There's no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus they're dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.
New ChemSafe AODD Range Transfer Pumps
ChemSafe 1040 Air-Operated Double Diaphragm Pumps
1.0 inch High Purity Pumps
Chemical transfer pumps with 1 inch (25.4 mm) connection available in PTFE and UHMWPE
Features:
Max flow rate of 37.5 gpm (142 lpm)
High quality machined design provides a precision fit and superior chemical containment compared to molded pumps
Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation
Removable air motor offers easy and intuitive maintenance ensuring maximum pump performance and availability
Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater
Materials:
Antifreeze
Gelcoats
Asphalts
Polyurethane
Windshield Washer Fluid
Diesel Exhaust Fluid (DEF)
Detergents
Water - Wastewater Treatment
Water - Wastewater Transfer
Food & Personal Care
Inks and Colorants
Applications:
Chemical Transfer
Low-Viscosity Material Transfer
Medium-Viscosity Material Transfer
Ink Transfer
ChemSafe 1590 Air-Operated Double Diaphragm Pumps
1.5 inch High Purity Pumps
Chemical transfer pumps with 1.5 inch (38.1 mm) connection available in PTFE and UHMWPE
Features:
Max flow rate of 85.2 gpm (322 lpm)
High quality machined design provides a precision fit and superior chemical containment compared to molded pumps
Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation
Removable air motor offers easy and intuitive maintenance ensuring maximum pump performance and availability
Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater
Materials:
Antifreeze
Gelcoats
Asphalts
Polyurethane
Windshield Washer Fluid
Diesel Exhaust Fluid (DEF)
Detergents
Water - Wastewater Treatment
Water - Wastewater Transfer
Food & Personal Care
Inks and Colorants
Applications:
Chemical Transfer
Low-Viscosity Material Transfer
Medium-Viscosity Material Transfer
Ink Transfer
ChemSafe 205 Air-Operated Double Diaphragm Pumps
0.25 inch High Purity Pumps
Chemical transfer pumps with 1/4 inch (6.3 mm) connection available in PTFE and UHMWPE
Features:
Max flow rate of 3.6 gpm (14 lpm)
High quality machined design provides a precision fit and superior chemical containment compared to molded pumps
Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation
Removable air motor offers easy and intuitive maintenance ensuring maximum pump performance and availability
Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater
Materials:
Antifreeze
Gelcoats
Asphalts
Polyurethane
Windshield Washer Fluid
Diesel Exhaust Fluid (DEF)
Detergents
Water - Wastewater Treatment
Water - Wastewater Transfer
Food & Personal Care
Inks and Colorants
Applications:
Chemical Transfer
Low-Viscosity Material Transfer
Medium-Viscosity Material Transfer
Ink Transfer
ChemSafe 307 Air-Operated Double Diaphragm Pumps
0.375 inch High Purity Pumps
Chemical transfer pumps with 3/8 inch (9.5 mm) connection available in PTFE and UHMWPE
Features:
Max flow rate of 7.9 gpm (30 lpm)
High quality machined design provides a precision fit and superior chemical containment compared to molded pumps
Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation
Removable air motor offers easy and intuitive maintenance ensuring maximum pump performance and availability
Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater
Materials:
Antifreeze
Gelcoats
Asphalts
Polyurethane
Windshield Washer Fluid
Diesel Exhaust Fluid (DEF)
Detergents
Water - Wastewater Treatment
Water - Wastewater Transfer
Food & Personal Care
Inks and Colorants
Applications:
Chemical Transfer
Low-Viscosity Material Transfer
Medium-Viscosity Material Transfer
Ink Transfer
ChemSafe 515 Air-Operated Double Diaphragm Pumps
0.5 inch High Purity Pumps
Chemical transfer pumps with 1/2 inch (12.7 mm) connection available in PTFE and UHMWPE
Features:
Max flow rate of 16.6 gpm (63 lpm)
High quality machined design provides a precision fit and superior chemical containment compared to molded pumps
Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation
Removable air motor offers easy and intuitive maintenance ensuring maximum pump performance and availability
Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater
Materials:
Antifreeze
Gelcoats
Asphalts
Polyurethane
Windshield Washer Fluid
Diesel Exhaust Fluid (DEF)
Detergents
Water - Wastewater Treatment
Water - Wastewater Transfer
Food & Personal Care
Inks and Colorants
Applications:
Chemical Transfer
Low-Viscosity Material Transfer
Medium-Viscosity Material Transfer
Ink Transfer
Graco Fireball Range of Grease Pumps
Features and Benefits:
Non-corrosive air motor design for long life
Double-acting piston pump ensures fluid flow
Robust grease inlet cage withstands the most abusive handling
Typical Applications:
Medium to high pressure, low to medium volume grease dispense
Automotive dealerships
Heavy duty dealerships
Fast lube and service centers
Fleet service facilities
Mining
In-plant
Typical Fluids:
Grease up to NLGI #2
Mini Fire-Ball 225, 50:1
Continuous Duty Flow Rate kg/min - 0.15 (0.32)
Maximum Fluid Pressure bar (psi) - 578 (8400)
Operating Range bar (psi) - 3-10 (40-140)
Air inlet Port Size - 3/8 in npt (f)
Material Outlet - 1/4 in npt (f)
Typical Applications:
Small maintenance facility
Dispense Points: 1
Annual Usage: Up to 2,268 kg
Line Length: Up to 30.5 m
Fire-Ball 300, 50:1
Continuous Duty Flow Rate kg/min - 0.54 (1.19)
Maximum Fluid Pressure bar (psi) - 580 (8400)
Operating Range bar (psi) - 3.0-9.7 (30-140)
Air inlet Port Size -3/8 in npt (f)
Material Outlet - 1/4 in npt (f)
Typical Applications:
High pressure grease to 579 bar (8400 psi)
Dispense Points: 1 to 2
Annual Usage: Up to 4,535 kg
Line Length: Up to 76.2 m
Fire-Ball 425, 50:1
Continuous Duty Flow Rate kg/min - 1.5 (3.35)
Maximum Fluid Pressure bar (psi) - 517 (7500)
Operating Range bar (psi) - 2.8-10.4 (40-150)
Air inlet Port Size -1/2 in npt (f)
Material Outlet - 3/8 in npt (f)
Typical Applications:
High pressure grease to 517 bar (7500 psi)
Dispense Points: 4 or more
Annual Usage: 9,072 kg or more
Line Length: Up to 76.2 m
Fire-Ball 425, 75:1
Continuous Duty Flow Rate kg/min - 0.88 (1.95)
Maximum Fluid Pressure bar (psi) - 517 (7500)
Operating Range bar (psi) - 2.8-7 (40-100)
Air inlet Port Size -1/2 in npt (f)
Material Outlet - 3/8 in npt (f)
Typical Applications:
High pressure grease to 517 bar (7500 psi)
Dispense Points: 4 or more
Annual Usage: 6,804 kg or more
Line Length: Up to 152.5 m
Graco Check-Mate Pump
Long-Lasting Piston Pumps with Sealed Wet Cup Piston pumps with enclosed, dual seal wet cup design with an extended seal life. Available with hydraulic or pneumatic motors and an optional runaway control.
Check-Mate, 14:1
Output at 60CPM kg/min - 26.0 (57.0)
Maximum Fluid Pressure bar (psi) - 96.5 (1400)
Maximum Air Input Pressure bar (psi) - 6.9 (100)
Typical Applications: Small maintenance facilities
Dispense Points: 1
Annual Usage: Up to 9,072 kg
Line Length: Up to 30.5 m
Check-Mate, 26:1
Output at 60CPM kg/min - 26.0 (57.0
Maximum Fluid Pressure bar (psi) -179.3 (2600)
Maximum Air Input Pressure bar (psi) - 6.9 (100)
Typical Applications: Small continuous-duty maintenance facilities
Dispense Points: 1 to 2 (simultaneous)
Annual Usage: Up to 9,072 kg
Line Length: Up to 76.2 m
Check-Mate, 55:1
Output at 60CPM kg/min - 13 (28.0)
Maximum Fluid Pressure bar (psi) -379.2 (5500)
Maximum Air Input Pressure bar (psi) - 5.2 (75)
Typical Applications: Small continuous-duty maintenance facilities
Dispense Points: 1 to 2 (simultaneous)
Annual Usage: Up to 9,072 kg
Line Length: Up to 76.2 m